J.W.HARRIS CO.INC. -- LEAD FREE PLUMBING SOLDERS, BRIDGIT STAY-SAFE 50, NICK 95/5 -- 3439-01-264-7689 
=====================  Product Identification  =====================

Product ID:LEAD FREE PLUMBING SOLDERS, BRIDGIT STAY-SAFE 50, NICK 95/5
MSDS Date:06/01/1992
FSC:3439
NIIN:01-264-7689
=== Responsible Party ===
Company Name:J.W.HARRIS CO.INC.
Address:10930 DEERFIELD ROAD
City:CINCINNATI
State:OH
ZIP:45242
Country:US
Info Phone Num:513-891-2000
Emergency Phone Num:513-891-2000/800-424-9300(CHEMTREC)
CAGE:27911
=== Contractor Identification ===
Company Name:J. W. HARRIS CO., INC.
Address:10930 DEERFIELD ROAD
Box:City:CINCINNATI
State:OH
ZIP:45242-4110
Country:US
Phone:513-891-2000
CAGE:27911

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC (SARA 313) (CERCLA)
CAS:7440-66-6
RTECS #:ZG8600000
Other REC Limits:NONE RECOMMENDED
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:COPPER (SARA 313) (CERCLA)
CAS:7440-50-8
RTECS #:GL5325000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2 MG/M3 FUME; 9596
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ANTIMONY (SARA 313) (CERCLA)
CAS:7440-36-0
RTECS #:CC4025000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG (SB)/M3; 9596
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:SILVER (SARA 313) (CERCLA)
CAS:7440-22-4
RTECS #:VW3500000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3; 9596
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9596

Ingred Name:NICKEL (SARA 313) (CERCLA)
CAS:7440-02-0
RTECS #:QR5950000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9596

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:TIN, ZINC AND ANTIMONY FUME MAY CAUSE
    METAL FUME FEVER. ACTUAL EXPOSURE TO FUMES WOULD ONLY OCCUR DURING
    WELDING OR SOLDERING PROCESS AND SHOULD BE DETERMINED BY MONITORING
    THE FUMES IN THE OPERATOR'S  BREATHING ZONE.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
    CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
    CARCINOGENS.
Effects of Overexposure:METAL FUME FEVER IS CHARACTERIZED BY FEVER,
    BODY ACHE AND CHILLS. FUMES FROM FLUX USED DURING SOLDERING MAY BE
    IRRITATING TO RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
    FUNCTIONS OR ILLNESS MAY HAVE SYMPOTMS EXACERBATED BY FUME
    IRRITANTS.

=======================  First Aid Measures  =======================

First Aid:REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS STOPPED,
    PERFORM ARTIFICIAL RESPIRATION. SUMMON MEDICAL AID IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:OPEN FLAME AND SPARKS CAN IGNITE COMBUSTIBLES.
Fire Fighting Procedures:NONFLAMMABLE. USE STANDARD FIREFIGHTING
    PROCEDURES FOR SURROUNDING MATERIALS IN THE FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:SOLDERING WIRE IS A NONHAZARDOUS SOLID
    AT AMBIENT TEMPERATURES. HAZARDS MAY RESULT FROM FUME GENERATED
    DURING USE. MAY CAUSE IRRITATION OR BURNS.
Other Precautions:SEE AMERICAN NATIONAL STANDARD Z49.1, SAFETY IN
    WELDING AND CUTTING PUBLISHED BY THE AMERICAN WELDING SOCIETY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDITIONS OF
    STORAGE. WHEN SOLDERING IN A CONFINED SPACE, OR WHERE LOCAL EXHAUST
    OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV, USE A RESPIRABLE
    FUME RESPIRATOR OR AN AIR  SUPPLIED RESPIRATOR.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS
    REQUIRED TO MAINTAIN EXPOSURE LEVELS.
Protective Gloves:NONE REQUIRED UNDER NORMAL CONDITIONS
Eye Protection:NONE REQUIRED UNDER NORMAL STORAGE
Other Protective Equipment:AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
    AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
    BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
SOLDERING FUMES CAN NOT BE CLASSIFIED SIMPLY. THE COMPOSITION AND
    QUANTITY ARE DEPENDENT UPON THE METAL BEING SOLDERED, THE
    PROCEDURES AND THE FILLER METAL USED. ONE RECOMMENDED WAY TO
    DETERMINE THE C OMPOSITION AND QUANTITY OF FUMES TO WHICH WORKERS
    ARE EXPOSED IS TO TAKE AN AIR SAMPLE FROM THE WORKER'S BREATHING
    ZONE.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NOT GIVEN
Appearance and Odor:SOLID, SILVER COLOR WIRE
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
    ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
    LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.