J.W.HARRIS CO.INC. -- STAY BRITE  -- 3439-00-602-1542
<pre>=====================  Product Identification  =====================

Product ID:STAY BRITE
MSDS Date:02/01/1992
FSC:3439
NIIN:00-602-1542
=== Responsible Party ===
Company Name:J.W.HARRIS CO.INC.
Address:10930 DEERFIELD ROAD
City:CINCINNATI
State:OH
ZIP:45242
Country:US
Info Phone Num:513-891-2000
Emergency Phone Num:513-891-2000/800-424-9300(CHEMTREC)
CAGE:27911
=== Contractor Identification ===
Company Name:J. W. HARRIS CO., INC.
Address:10930 DEERFIELD ROAD
Box:City:CINCINNATI
State:OH
ZIP:45242-4110
Country:US
Phone:513-891-2000
CAGE:27911

=============  Composition/Information on Ingredients  =============

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 96%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9293

Ingred Name:SILVER  (SARA III)
CAS:7440-22-4
RTECS #:VW3500000
Fraction by Wt: 4%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3; 9293
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE- INHALATION OF TIN FUME MAY
    CAUSE METAL FUME FEVER. OVEREXPOSRE MAY CAUSE HEADACHE, NAUSEA,
    DIZZINESS, BODY ACHES AND ANEMIA. FUMES MAY IRRITATE EYES AND SKIN.
    CHRONIC- MAY CAUSE COUGH, CHEST PA IN, FEVER, SHORTNESS OF BREATH.
    TARGET ORGAN:LUNGS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE, SKIN AND RESPIRATORY TRACT IRRITATION,
    NAUSEA, VOMITING, FEVER, BODY ACHES, CHILLS, DIZZINESS, HEADACHE
Medical Cond Aggravated by Exposure:PERSONS WITH IMPAIRED RESPIRATORY
    FUNCTION MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THIS PRODUCT.

=======================  First Aid Measures  =======================

First Aid:CALL A DOCTOR IF SYMPTOMS PERSIST. EYE:IMMEDIATELY FLUSH WITH
    WATER FOR 15 MINUTES, HOLDING EYELIDS OPEN. SKIN:WASH WITH SOAP &
    WATER. INHALED:REMOVE TO FRESH AIR. PROVIDE CPR/OXYGEN IF NEEDED.
    ORAL:N OT LIKELY.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:WATER FOG, FOAM, CARBON DIOXIDE. DO NOT USE WATER
    ON FIRE WHERE MOLTEN METALS IS PRESENT.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
    NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
    FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:OPEN FLAME OR SPARKS CAN IGNITE
    COMBUSTIBLES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT AND USE.
Neutralizing Agent:NOT RELEVANT

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM INCOMPATIBLE MATERIALS.
    FOOD AND DRINK SHOULD NOT BE CONSUMED IN AREAS WHERE METAL
    EXPOSURES ARE POSSIBLE.
Other Precautions:READ WARNING LABELS. KEEP OUT OF REACH OF CHILDREN.
    FOR INDUSTRIAL USE ONLY. DO NOT BREATHE FUMES. WASH THOROUGHLY
    AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED SUPPLIED AIR RESPIRATORY
    PROTECTION OR RESPIRABLE FUME RESPIRATOR WHEN WELDING, BRAZING OR
    SOLDERING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR VENTILATION
    DOES NOT KEEP EXPOSURE B ELOW TLV.
Ventilation:USE GENERAL & LOCAL EXHAUST AT FLAME TO KEEP FUMES AND
    GASES BELOW TLV'S IN THE WORKER'S BREATHING ZONE & GENERAL AREA.
Protective Gloves:HEAT RESISTANT DURING SOLDERING
Eye Protection:FACE SHIELD/GOGGLES DURING SOLDERING
Other Protective Equipment:INSTALL EYE WASH STATION.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES. WASH THOROUGHLY BEFORE EATING AND DRINKING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
NRC/State Lic Num:NOT RELEVANT
Spec Gravity:NOT RELEVANT
Evaporation Rate &amp; Reference:NOT RELEVANT
Solubility in Water:INSOLUBLE
Appearance and Odor:WIRE, GRAY TO SILVER IN COLOR. SOLDER MAY BE
    SOLID/CONTAIN AN INNER CORE OF FLU

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:SOLDERING FUMES CANNOT BE CLASSIFIED
    SIMPLY, DEPENDING ON METAL BEING SOLDERED, PROCESS, PROCEDURES &
    FILLER METALS USED

====================  Disposal Considerations  ====================

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
    DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.